RNG

From the vendor

Doug Deeper's box of batsh*t crazy fuzz.

The fuzz itself is fixed in the fully on state, and the fun starts with your playing dynamics and your guitar volume pot. You'll get different low-frequency oscillations messing with your tone, adding buzzes, arpeggiation and gating. Awesome for adding crazy texture here and there.

The kit is supplied with a vertical-mount pot which has a round shaft, so you'll need a set-screw fitting knob.

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knob is not included.

Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs.

Inspired by: Doug Deeper / Mid-Fi Random Number Generator

Difficulty: Easy

PCB size: 50 x 25mm

Knobs required: 1

Enclosure: 1590B

Direct-Connect compatible (4-way)

If you want the kit pre-built you must add the enclosure option below and select your knobs in the Components section. Check Specials for powder-coated enclosure availability.

Download the INSTRUCTION PDF