1590BB · 5 knobs
Fuzz Dog· ohdeebee
Oh Deebee!
Based on the Dunwich Amplification Olde Dirty Bass· 2 other boards clone it
- Category
- Overdrive· OD/Dist/Preamp
- Difficulty
- Medium
- Price
- £52.80
- Tags
- od-distortion
From the vendor
Hey bass buds - here's one for you. OK, guitar guys also welcome.
Massive growling dirt box based on the OCD. However, forget about sonic similarties, as 'based on' is quite loose.
The up-front grunt is indeed OCD topology, but here we have it on a +/-9V supply for extra headroom and volume. The original uses a different charge pump to supply +/-18V from an 18V supply, but that's overkill, honestly. A three-way CUT control lets you select the bottom end cut off to suit your needs. Two way clipping gives you two distinct flavours of dirt.
After that it goes off-piste. A James tone stack tuned for bass makes tweaking the tone a pleasure. You also have a mids-boost pot to play with, making this a very versatile box.
Supplied with Lumberg jacks if you go for top-mount so they'll fit nicely above the pots.
If you want the PCBs without parts there's a link for that at the bottom of the page.
Partial kit: PCBs, all board-mounted components (not footswitches), pots.
Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.
Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included.
Builds are only available with full kits including enclosures. Please choose appropriate knobs.
Inspired by: Olde Dirty Bass
Difficulty: Medium
PCB size: 80 x 38mm
Knobs required: 5
Enclosure: 1590BB
Download the INSTRUCTION PDF
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 48 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 16 | ||||
| R1 | 1M | 1M | ||
| R2 | 4K7 | 4.7k | ||
| R3 | 10K | 10k | ||
| R4 | 4K7 | 4.7k | ||
| R5 | 1K | 1k | ||
| R6 | 27K | 27k | ||
| R7 | 100K | 100k | ||
| R8 | 100K | 100k | ||
| R9 | 1M | 1M | ||
| R10 | 3K3 | 3.3k | ||
| R11 | 22K | 22k | ||
| R12 | 22K | 22k | ||
| R13 | 100K | 100k | ||
| R14 | 100R | 100 | ||
| R15 | 100K | 100k | ||
| R16 | 100R | 100 | ||
| Capacitors 17 | ||||
| C1 | 1n | 1n | ||
| C2 | 330p | 330p | ||
| C3 | 68n | 68n | ||
| C4 | 68n | 68n | ||
| C5 | 1u | 1u | ||
| C6 | 2u2 | 2.2u | Electrolytic capacitor | |
| C7 | 10n | 10n | ||
| C8 | 330p | 330p | ||
| C9 | 2n2 | 2.2n | ||
| C10 | 1n5 | 1.5n | ||
| C11 | 150n | 150n | ||
| C12 | 100n | 100n | ||
| C13 | 100n | 100n | ||
| C14 | 100u | 100u | Electrolytic capacitor | |
| C15 | 100u | 100u | Electrolytic capacitor | |
| C16 | 10u | 10u | Electrolytic capacitor | |
| C17 | 330p | 330p | ||
| Diodes 2 | ||||
| D3 | 1N5817 | 1N5817 | ||
| D4 | 1N4148 | 1N4148 | ||
| Transistors 2 | ||||
| Q1 | BS170** | BS170 | ||
| Q2 | BS170** | BS170 | ||
| ICs 2 | ||||
| IC1 | TL072/TL082 | TL072 / TL082 | ||
| IC2 | 7660SEPA/LT1054* | 7660S / LT1054 | ||
| Potentiometers 5 | ||||
| BASS | 1MB | B1M | ||
| GAIN | 1MA | A1M | Potentiometer | |
| MID | 100KC | C100k | Potentiometer | |
| TREB | 1MA | A1M | Potentiometer | |
| VOL | 1MA | A1M | Potentiometer | |
| Switches 2 | ||||
| CLIP | SPDT ON-ON | SPDT ON-ON | ||
| CUT | SPDT ON-OFF-ON | SPDT ON-OFF-ON | ||
| LEDs 2 | ||||
| D1 | 3mm red LED | 3MM RED LED | ||
| D2 | 3mm red LED | 3MM RED LED | ||
Other boards based on the Dunwich Amplification Olde Dirty Bass
- Dunwich Amplification Olde Dirty Bass - 125b/Custom version Dirtbox Layouts
- Dunwich Amplification Olde Dirty Bass - Big box version Dirtbox Layouts · 125B