Ocean Engine Chorus

From the vendor

Six knobs of swooshy, sublime chorus. PT2399-based chorus with a huge range of wobbles available. Controls are: • Rate - kinda obvious. • Shape - alters the LFO waveform. • Depth - how much you want the LFO to hit the delay causing modulation. • Intensity - effect/dry signal balance. • Dimension - length of delay. Just a little... or metric shed loads. • Animate - change your subtle chorus into a world of madness. So much fun in a little 1590B box. The board has been designed for 3mm resistors. Beware - these are tiny, fiddly and the codes are difficult to read, though the neat results are worth the effort. We can supply 6mm resistors if you're happy to stand them upright on the PCB. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. We recommend 1900H knobs as the pot spacing is a tight 17.5mm. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosures. Please choose appropriate knobs. Inspired by: Sea Machine Difficulty: Medium-Hard PCB size: 50 x 57mm Knobs required: 6 (Small!) Enclosure: 1590B Direct Connect compatible (4 way) Download the INSTRUCTION PDF