Mr Creosote

From the vendor

Wafer thin? Hell no. This is a big, fat boost.

Tuned specifically for bass, the FET input will add sparkle and life to your signal, whipping that top end into a frenzy. The germanium can at the end adds some grit to the sauce - adjust the bias to taste.

You can opt for an internal bias setting to set-and-forget your grit, or go for an external pot if you like to tinker.

Works just as well on guitar - honestly!

Spots on the board for both through-hole or SMT FET - save a couple of quid if you're handy with the tiny stuff.

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knobs are not included.

Builds are only available with full kits including enclosures. Please choose appropriate knobs.

Inspired by: Phat Phuk B

Difficulty: Easy

PCB size: 50 x 25mm

Knobs required: 1 / 2

Enclosure: 1590B

Direct Connect compatible (4 way)

Download INSTRUCTION PDF