Model T Mini - Sunn PreAmp

From the vendor

Stoner heaven. Sunn Model T amp growl squeezed into a diminiutive 1590B.

Configure it as a Twin channel pre-amp hardwired for both channels at once in parallel, or add a toggle switch to go from Normal > Both > Brite (3 way switch) or simply between Normal > Brite (2 way switch).

If you're comfortable working with fiddly SMT components you can save a few quid and go for surface mount FETs. Through hole or SMT, your fets can be biased to perfection with the trimmers.

Controls for Bass, Mid and Treble, as well as level controls for each channel (Brite and Normal) and a Master volume. After some experimentation we're offering the bass pot as original linear or much better (in our opinion) log.

Board mounted pots and toggle switch for a nice, neat build and secure mounting in the enclosure. The pots have round shafts, so you'll need knobs that are set-screw fitting.

We recommend 1900H knobs for this as the pot spacing is only 17.5mm

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCBs, all board-mounted components depending on selected options (not footswitches), pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosure. Please choose appropriate knobs.

Inspired by: Sunn Model T amp

Difficulty: Medium

PCB size: 54 x 50mm

Knobs required: 6 little 'uns

Enclosure: 1590B

Check Specials for powder-coated enclosure availability.

Download the INSTRUCTION PDF