Lunar Shot - Optical Trem

From the vendor

All the fun of a Tremulus Lune Tremolo with a few less knobs. Sometimes less is... well, less, but sometimes more is too much. This is our take on CultureJam's Shoot the Moon trem. The same great sounds as the TL but stripped down to four, or even just three controls. Wave Shape, Speed, Depth, and optional Gain which you can have as internal trimmer. There's an optional on-board rate indicator LED but beware - this will be on all the time, whether the effect is bypassed or not. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Inspired by: Shoot The Moon Tremelo Difficulty: Medium PCB size: 50 x 40mm Knobs required: 3/4 Enclosure: 1590B Direct-Connect compatible (4-way) Build doc on the way. Download the INSTRUCTION PDF