Hype-R Rat

From the vendor

This pedal has been getting a lot of hype, and you know what? It's pretty darn good. Yes, It's essentially a tweaked Rat with bunting and bells on, but those tweaks do give it a different flavour to your standard Rodent-based box. Includes an on-board charge pump to run things at 18V from your standard supply, giving lots of headroom and different dirt dynamics than your 9V Rat. You can wire it up for true bypass, or use the integral buffered bypass if you want to keep it closer to the original, though we haven't included relay switching. NOTE: You can't wire it as buffered bypass if using the OptoPuss. Nor can you use a ribbon if doing this with a standard daughterboard. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosures. Please choose appropriate knobs. Inspired by: 1981 DRV Difficulty: Medium PCB size: 50 x 41mm Knobs required: 3 Enclosure: 1590B Direct-Connect compatible (4-way) Download theINSTRUCTION PDF