Enclosure not stated
From the vendor
Based on the circuit over at Beavis Audio Research, this tiny unit will help mop up the hum from your pesky power supply. This tiny thing will fit in the tightest of spaces - wire it inside your pedal between the DC input and the board, or you can add DC sockets and make an external box. Please note: this circuit should be used on single pedals rather than an entire chain. Not suitable for high current. Kit includes: PCB, all components, hook-up wire. Difficulty: Easy PCB size: 15 x 15mm Here's the INSTRUCTION PDF
Schematic
The schematic is in the vendor's build document, page 2. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 4 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 1 | ||||
| R1 | 100R | 100 | minimum 1/2W rated | |
| Capacitors 2 | ||||
| C1 | 100u | 100u | minimum 50V rated | |
| C2 | 47n | 47n | minimum 50V rated | |
| Diodes 1 | ||||
| D1 | 1N4002 (or higher) | 1N4002 (OR HIGHER) | ||