Hooch Drive

From the vendor

Yet Another Tube Screamer? Yes, there's a lot of them about. This is another sweety with an on board charge pump gives you 18V (or thereabouts) from your 9V supply, giving you a lot more headroom to play with than you'd normally get. Loud, loud, loud. Two clipping modes as standard, but you can opt to take the clipping diodes out altogether for a third mode - fully open boost. Louder still. Use with caution. Choose the 3-way toggle in the options for this. Where this particular pedal shines is the clean blend. You bass players are going to love it. DISCLAIMER - The original uses a pair of hard-to-source diodes for one of the clipping options. We aren't supplying these - sorry. Checking the data sheets there's no magic involved. Get over it. Feel free to source your own but chances are very slim of hearing any difference over the 1N4148 supplied. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs. Inspired by: Moonshine Difficulty: Medium PCB size: 50 x 50mm Knobs required: 4 Enclosure: 1590B Direct-Connect compatible (4-way) Download the INSTRUCTION PDF