Fuzz Raw - V2 (4 transistor)

From the vendor

A delicious box of over-the-top fuzz assault. This kit is traced directly from an original early two-knob pedal that graces the FuzzDog pedalboard. That model has an internal trimmer for a fixed Drive control, but the PCB is designed so you can have this as a pot if preferred. We've also changed the pot tapers to make it a more pleasant pedal to use. It's a Big Muff after all, so linear volume pot is not the way to go. The unit we traved had germanium clipping diodes, but later models use 1N5227B. You have the choice of either. Will you hear a difference? Debatable. Not to be confused with the https://shop.pedalparts.co.uk/Fuzz_Raw_-_V1_(7_transistor)/p847124_20746579.aspx" target="_blank">earlier model (which has seven gain stages and is notoriously difficult to get working), this one is based around a Big Muff Pi but with a different tone stack. It has a thick, meaty sound which can get quite clanky with the tone right up. This is still one of the favourite BMP-based pedals around this place. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosures. Please choose appropriate knobs. Inspired by: Fuzz War V2 Difficulty: Medium PCB size: 50 x 40mm Knobs required: 2,3 Enclosure: 1590B Direct-Connect compatible (4-way) Download the INSTRUCTION PDF