FuzzPup Vintage Soda

From the vendor

This is part of our FuzzPup range of circuits designed for 1590A builds. They're not especially difficult, but working in a confined space can be fiddly. Take heed.

Of course there's nothing stopping you using these PCBs for 'standard' builds. They're Direct Connect compatible.

A different PCB is available for 'standard' 1590B builds - see the related products listed below.

NOTE: Images other than the main circuit are to illustrate general FuzzPup V2 build style

If you like your fuzz raw, splattery and face-meltingly intense this one's for you.

Two different flavours can be built - standard (if that word even applies to this fuzz), and vintage master, which has a pronounced octave-up. The only difference between the two builds is reversing a transistor. In either guise your amp will feel like its been on the wrong end of a red hot poker.

You can also add the Choas switch if you like. This makes the whole thing sound like it's down a K-hole and isn't happy about it at all. Not for those looking for pure tone. Or our own little mod, the MESS pot. This does some weird, skanky filtering and generally makes things horrible in a lovely way.

Caution: This is not a clean, quiet effect. It's a beast, and as such has noisy fangs.

Comes with a separate daughterboard to easily mount the pots to the main PCB.

Pots have round shafts so you'll need set-screw fitting knobs. Pot spacing is 18mm.

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and daughterboard, jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosures. Please choose appropriate knobs.

Supplied with 9mm pots (round shaft)

Inspired by: Devi Ever Soda Meiser / Vintage Fuzz Master

Difficulty: Hard

PCB size: 30 x 55mm

Knobs required: 2

Enclosure: 1590A

Direct-Connect compatible (4-way)

Download the INSTRUCTION PDF

You'll also need V2 of the general FuzzPup doc