EPic Boost

From the vendor

NOTE: This is based on the original version of the pedal, not the more recent one which has ditched the fat mode in favour of a reduced output/+3dB switch. Clone of a very neat little transparent boost, based on the pre-amp section of the EP-3 Echo Machine. The circuit is actually nothing like that pre-amp, but it does sound like it. The circuit has Bright and Fat modes, selected with two switches. These can be internal DIP switches, or external toggle switches. If you do go for toggles they are board-mounted for minimal wiring and easy enclosure mounting. Combine with a Power Pump if you want to run it at 18v from your 9v supply for more headroom. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knobs are not included. Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs. Inspired by: EP Boost Difficulty: Easy PCB size: 50 x 35mm Knobs required: 1 Enclosure: 1590B Direct-Connect compatible (4-way) If you want the kit pre-built you must add the enclosure option below and select your knobs in the Components section. Check Specials for powder-coated enclosure availability. Download INSTRUCTION PDF