Cab Sim ROG Condor

From the vendor

Great speaker cabinet simulator from RunOffGroove. Stock setting emulates the frequency response of a 4x10 cab full of Jensen P10R cones, making your headphone or direct recording set-up sound much more convincingly real. Add the optional switch to go between stock and Marshall settings, which adjusts the frequency response to that of the speaker sims included on their amps. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knobs are not included. Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs. Inspired by: Run Off Groove Condor Difficulty: Medium PCB size: 50 x 37mm Knobs required: 2 Enclosure: 1590B Direct-Connect compatible (4-way) If you want the kit pre-built you must add the enclosure option below and select your knobs in the Components section. Check Specials for powder-coated enclosure availability. Download the INSTRUCTION PDF