Black Tiger Boost

From the vendor

We've no idea why this was discontinued, but what the hey? Here it is.

Really sweet boost, with up to 20dB on tap. Set it to a little volume, or crank it to really push those tubes.

The kit is supplied with a vertical-mount pot which has a round shaft, so you'll need a set-screw fitting knob.

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knob is not included.

Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs.

Inspired by: Mr Black Boost Tiger

Difficulty: Easy

PCB size: 50 x 23mm

Knobs required: 1

Enclosure: 1590B

Direct-Connect compatible (4-way)

If you want the kit pre-built you must add the enclosure option below and select your knobs in the Components section. Check Specials for powder-coated enclosure availability.

Download the INSTRUCTION PDF