Ass Krack Fuzz

From the vendor

One board, two delightfully freaky boxes of fuzz fun - the disASS-KRACKle.

The Krackle build is fairly 'normal' when held up against much of the designer's output, mostly being pretty extreme. This one is easy to tame into very useable fuzz territory, but retains some of the signature splat when fully cranked.

A single jumper adds a feedback loop, giving you the Disaster. A far cry from it's vanilla sibling, this is a real hellraiser. Splattery gated fuzz that weirds off into new territory with every tweak of the control knob. There are some amazingly useful textures on tap. Well worth a punt.

Of course, you can go for the best of both worlds by adding the onboard toggle switch, flipping between both pedals.

Of course, you can go for the best of both worlds by adding the onboard toggle switch, flipping between both pedals.

A tiddly little hack is required on Q1. See build doc for details.

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components), pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knobs are not included.

Builds are only available with full kits including enclosure. Please choose appropriate knobs.

Inspired by: Disaster Fuzz / Krackle Fuzz

Difficulty: Easy

PCB size: 50 x 25mm

Knobs required: 2

Enclosure: 1590B

Direct-Connect compatible (4-way)

Download the INSTRUCTION PDF