Enclosure not stated · 3 knobs
Vesuvius Fuzz
Based on the EQD Erupter· 1 other board clones it
- Category
- Fuzz
- Controls
- Bias- · Fb · Vol
- Price
- £4.50in stock
From the vendor
Vesuvius Fuzz – really loud fuzz. This board is a modded version of the EQD Erupter, using some easier to find transistors and extra trim pots for ease.
The main dial set at 12 o’clock gives you a slight volume boost and days of sustain. Turning it left and you get a more gated, lower output – turn it to the right and you get a louder, more refined. Our board has an additional trim pot for output volume which can also be wired to a pot to give you additional control over the output. We’ve also added a trim pot to make it easier to adjust the feedback resistor – easier than swapping/changing resistors around aint it!
Controls:
• Bias
• Volume (internal trim pot)
Compares to: EQD Erupter
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 27 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 9 | ||||
| R1 | 1M | 1M | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R2 | 1M | 1M | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R3 | 1M | 1M | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R4 | 5K6 | 5.6k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R5 | 1K | 1k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R6 | 100K | 100k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R7 | 470r | 470 | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R8 | 2K | 2k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R9 | 1K5 | 1.5k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| Capacitors 8 | ||||
| C1 | 1uf | 1u | CP Radial D5.0mm P2.00mm | |
| C4 | 1uf | 1u | CP Radial D5.0mm P2.00mm | |
| C2 | 100uf | 100u | CP Radial D5.0mm P2.00mm | |
| C7 | 22u | 22u | CP Radial D5.0mm P2.00mm | |
| C3 | 1n | 1n | C Rect L7.0mm W2.0mm P5.00mm | |
| C5 | 47p | 47p | C Rect L7.0mm W2.0mm P5.00mm | |
| C6 | 100p | 100p | C Rect L7.0mm W2.0mm P5.00mm | |
| C8 | 68n | 68n | C Rect L7.0mm W2.0mm P5.00mm | |
| Diodes 1 | ||||
| D1 | 1N4001 | 1N4001 | D DO-41 SOD81 P7.62mm Horizontal | |
| Transistors 3 | ||||
| Q2 | 2N5088 | 2N5088 | TO-92 Inline Wide-large-solderpads | |
| Q3 | 2N5088 | 2N5088 | TO-92 Inline Wide-large-solderpads | |
| Q1 | J201 | J201 | TO-92 Inline Wide-large-solderpads | |
| ICs 1 | ||||
| 42TL019 | 42TL019 | 42TL019 | Transformer XICON-42TM022 | |
| Potentiometers 4 | ||||
| Bias-1 | 5K | 5k | 6mm-Trim-Pot | |
| FB1 | R_POT_TRIM | R_POT_TRIM | 6mm-Trim-Pot | |
| Vol | 100K | 100k | 6mm-Trim-Pot | |
| Bias-2 | C10K | C10k | Potentiometer Alpha just holes | |
| Other 1 | ||||
| G*** | LOGO | LOGO | domain-18mm | |
Other boards based on the EQD Erupter
- Volcano Device PCB Guitar Mania · 1590B · €9.90