Enclosure not stated · 2 knobs

Shouter

Based on the EQD Bellows· 2 other boards clone it

From the vendor

The Shouter is our take on the EQD Bellows

The Shouter…dirty, gritty, fuzzy ARGHHHH – the best way we can describe this one

Controls:

• Gain

• Volume

Note: Remember to socket any IC’s and transistors.

Compares to: EQD Bellows

The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Ref	Value	Normalized	Type
Resistors 4
R1	10K	10k	0.25 Watt Resistor
R2	10K	10k	0.25 Watt Resistor
R3	22K	22k	0.25 Watt Resistor
R4	200r	200	0.25 Watt Resistor
Capacitors 6
C3	100uF	100u	CP Radial D5.0mm P2.00mm
C6	100uF	100u	CP Radial D5.0mm P2.00mm
C1	22nF	22n	C Rect L7.0mm W2.0mm P5.00mm
C2	1nF	1n	C Rect L7.0mm W2.0mm P5.00mm
C4	100nF	100n	C Rect L7.0mm W2.0mm P5.00mm
C5	68nF	68n	C Rect L7.0mm W2.0mm P5.00mm
Diodes 1
D1	1N5817	1N5817	Standard Diode
Transistors 2
Q1	PF5102	PF5102	TO-92 Inline Wide-large-solderpads
Q2	MPSA13	MPSA13	TO-92 Inline Wide-large-solderpads
Potentiometers 2
GAIN	B250K	B250k	Potentiometer Alpha just holes
VOL	B100K	B100k	Potentiometer Alpha just holes
Other 1
G***	LOGO	LOGO	domain-14x1.6