Enclosure not stated
From the vendor
Based on the classic EHX LPB-1, with the option of building the screaming bird variant too – with the added “Plus” that allows you to use a 6mm trimmer instead of the external pot, if you want to to set the volume and forget!
This board is great on it’s own and has a super small footprint (only just bigger than a 16mm pot!) but also works fantastic with other pedals – combine it with another board into one mega box – go nut!
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 10 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| R1 | 430k | 430k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R2 | 43k | 43k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R3 | 10k | 10k | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| R4 | 390r | 390 | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | |
| Capacitors 2 | ||||
| C1 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| C2 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| Transistors 1 | ||||
| Q1 | 2N5088 | 2N5088 | TO-92 Inline Wide-large-solderpads | |
| Potentiometers 2 | ||||
| 100K | 6mm-Trim-Pot | 6MM-TRIM-POT | 6mm-Trim-Pot | |
| VOL | A100K | A100k | Potentiometer Alpha just holes | |
| Other 1 | ||||
| G*** | LOGO | LOGO | domain-18mm | |
Other boards based on the EHX LPB-1
- Donut Madbean · 1590A