Enclosure not stated · 2 knobs
From the vendor
The Jimi Fuzz is our take on the Dunlop JHF1
The Jimi Fuzz is a pedal board classic. It responds really well to your guitars volume pot, but totally dimed it also sounds brilliant. It’s an easy build too! The board has 2 test pads allowing you to check the voltage bias easily and also has the voltages printed on the board to help!
Controls:
• Fuzz
• Volume
Note: Remember to socket any IC’s and transistors!
Compares to: Dunlop JHF1
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 18 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| R1 | 20K | 20k | 0.25 Watt Resistor | |
| R2 | 82K | 82k | 0.25 Watt Resistor | |
| R3 | 330R | 330 | 0.25 Watt Resistor | |
| R4 | 3.1K | 3.1k | 0.25 Watt Resistor | |
| R5 | 10R | 10 | 0.25 Watt Resistor | |
| Capacitors 5 | ||||
| C1 | 100uF | 100u | CP Radial D5.0mm P2.00mm | |
| C2 | 2.2uF | 2.2u | CP Radial D5.0mm P2.00mm | |
| C4 | 22uF | 22u | CP Radial D5.0mm P2.00mm | |
| C3 | 47pF | 47p | C Disc D4.3mm W1.9mm P5.00mm | |
| C5 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | Standard Diode | |
| Transistors 2 | ||||
| Q1 | BC108 | BC108 | Trans-Can-WIDE | |
| Q2 | BC108 | BC108 | Trans-Can-WIDE | |
| Potentiometers 2 | ||||
| FUZZ | B1K | B1k | Potentiometer Alpha just holes | |
| VOL | A500K | A500k | Potentiometer Alpha just holes | |
| Trimmers 2 | ||||
| TRIM1 | 50K | 50k | 6mm-Trim-Pot | |
| TRIM2 | 10K | 10k | 6mm-Trim-Pot | |
| Other 1 | ||||
| G*** | LOGO | LOGO | domain-14x1.6 | |