Enclosure not stated
From the vendor
A really simple, unity output buffer. For a more In depth look at buffers, check out Basic Buffers. Handy to add into a build that hasn’t got a buffer due to its super small size. Designed to be used with a pedal, not stand-alone (for that take a look at the Buffer Up & – Cornish LD1 Clone.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 6 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| R1 | 2M | 2M | 0.25 Watt Resistor | |
| R2 | 2M | 2M | 0.25 Watt Resistor | |
| R3 | 3K3 | 3.3k | 0.25 Watt Resistor | |
| Capacitors 2 | ||||
| C1 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| C2 | 10uF | 10u | C Rect L7.0mm W2.0mm P5.00mm | |
| Transistors 1 | ||||
| Q1 | J201 / 2N5457 | J201 / 2N5457 | TO-92 Inline Wide-large-solderpads | |