Enclosure not stated
Five Cats Pedals Labs (Effect Pedals Testing Kit)
- Category
- Utility
- Price
- £5.00in stock
From the vendor
If you’re making fx boards quite a bit – the test phase can be a tedious part…not any more! Our super simple test hookup board even comes with a 9V/18V/-9V toggle switch and an audio probe if you need it!
With a full colour guide to help you setup and use your Five Cats Pedals Lab’s board – you’ll be testing in no time!
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 19 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 1 | ||||
| CLR2 | 4.7K | 4.7k | 0.25 Watt Resistor | |
| Capacitors 5 | ||||
| C1 | 10uF | 10u | Cap-Electro-Radial | |
| C5 | 10uF | 10u | Cap-Electro-Radial | |
| C6 | 10uF | 10u | Cap-Electro-Radial | |
| C7 | 10uF | 10u | Cap-Electro-Radial | |
| C9 | 100nF | 100n | Cap-Box | |
| Diodes 2 | ||||
| D1 | 1N4148 | 1N4148 | Standard Diode | |
| D2 | 1N4148 | 1N4148 | Standard Diode | |
| ICs 1 | ||||
| U1 | 7660S | 7660S | IC-DIP-8 | |
| Switches 3 | ||||
| 3PDT1 | 3PDT | 3PDT | 3PDT-Oval-large-pads | |
| ON/ON | VOLT-SOURCE | VOLT-SOURCE | SPDT-Switch-Holes | |
| PROBE1 | SW_SPDT | SW_SPDT | SPDT-Switch-Holes | |
| LEDs 1 | ||||
| D3 | LED | LED | LED D3.0mm | |
| Jacks & sockets 3 | ||||
| PWR1 | Barrel_Jack | BARREL_JACK | BarrelJack Wuerth 6941xx301002 | |
| J1 | INPUT | INPUT | Jack 6.35mm Neutrik NMJ4HFD2 Horizontal | |
| J2 | OUTPUT | OUTPUT | Jack 6.35mm Neutrik NMJ4HFD2 Horizontal | |
| Other 3 | ||||
| G*** | LOGO | LOGO | fcp-labs-logo | |
| TP1 | Board-Connector-4-board-connector | BOARD-CONNECTOR-4-BOARD-CONNECTOR | TH-SolderPad-Medium-4 | |
| TP2 | TestPoint | TESTPOINT | TestPoint Pad 1.5x1.5mm | |