1590B · 3 knobs
From the vendor
Octave up fuzz, with ring modulation, and drone sounds…it’s a usual Death By Audio venture…weird!
You’ll need a transformer on this one, make sure you solder it before the volume pot 🙂
Controls
• Gain
• Vol
• Tone
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 16 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 2 | ||||
| R1 | 910K | 910k | 0.25 Watt Resistor | |
| R2 | 62K | 62k | 0.25 Watt Resistor | |
| Capacitors 4 | ||||
| C1 | 1nF | 1n | Cap-Box | |
| C2 | 100nF | 100n | Cap-Box | |
| C3 | 47uF | 47u | Cap-Electro-Radial | |
| C4 | 4.7uF | 4.7u | Cap-Electro-Radial | |
| Diodes 3 | ||||
| D2 | 1N34A | 1N34A | Standard Diode | |
| D3 | 1N34A | 1N34A | Standard Diode | |
| D1 | 1N5817 | 1N5817 | Standard Diode | |
| ICs 1 | ||||
| U1 | LM741 | LM741 | IC-DIP-8 | |
| Potentiometers 3 | ||||
| GAIN | B1M | B1M | Potentiometer Alpha just holes | |
| TONE | B250K | B250k | Potentiometer Alpha just holes | |
| VOL | A10K | A10k | Potentiometer Alpha just holes | |
| Trimmers 1 | ||||
| T1 | 42TM002 | 42TM002 | Transformer 42TM022 | |
| Other 2 | ||||
| G*** | LOGO | LOGO | domain-22mm | |
| TP1 | Board-Connector-4-board-connector | BOARD-CONNECTOR-4-BOARD-CONNECTOR | TH-SolderPad-Medium-4 | |