1590A · 1 knobs
Bow Booster
Based on the EQD Arrows· 1 other board clones it
- Category
- Boost· Boosts, Pre-Amp
- Controls
- Lvl
- Price
- £3.50in stock
From the vendor
An all encompassing discrete tone sculpting preamp booster (according to EQD), it brightens up pedals and works well on neck pickups too! With a single Level control, it will either boost or cut your signal. Use it with a fuzz to clean up some a touch to much bass, put it in front of an overdrive and push it harder – or use it solo and make your signal pop. Fits in a 1590a!
Controls:
• Level- does what it says on the tin!
Compares to: EQD Arrows
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| R1 | 1M | 1M | 0.25 Watt Resistor | |
| R2 | 10M | 10M | 0.25 Watt Resistor | |
| R3 | 1K3 | 1.3k | 0.25 Watt Resistor | |
| R4 | 100K | 100k | 0.25 Watt Resistor | |
| Capacitors 5 | ||||
| C2 | 100uF | 100u | CP Radial D5.0mm P2.00mm | |
| C1 | 100pF | 100p | C Disc D4.3mm W1.9mm P5.00mm | |
| C3 | 4.7nF | 4.7n | C Rect L7.0mm W2.0mm P5.00mm | |
| C4 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| C5 | 10nF | 10n | C Rect L7.0mm W2.0mm P5.00mm | |
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | Standard Diode | |
| Transistors 1 | ||||
| Q1 | 2N5089 | 2N5089 | TO-92 Inline Wide-large-solderpads | |
| Potentiometers 1 | ||||
| LVL | B10K | B10k | Potentiometer Alpha just holes | |
| Other 1 | ||||
| G*** | LOGO | LOGO | bow-booster-logo | |
Other boards based on the EQD Arrows
- Amentum Boost PedalPCB · 125B · $8.00