Enclosure not stated · 2 knobs
Blend me up
Based on the Wet/Dry Signal Mixer
- Category
- Utility
- Controls
- Level · Blend
- Price
- £3.50in stock
From the vendor
A super neat, compact board that can be added to your existing circuit and used to blend your dry (straight from guitar/bass) to the wet (effect) signal.
The board is just a little bigger than the back of a 16mm potentiometer.
Controls
• Mix
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| R1 | 1M | 1M | 0.25 Watt Resistor | |
| R2 | 1M | 1M | 0.25 Watt Resistor | |
| R4 | 100K | 100k | 0.25 Watt Resistor | |
| R5 | 100K | 100k | 0.25 Watt Resistor | |
| R3 | 3K3 | 3.3k | 0.25 Watt Resistor | |
| Capacitors 2 | ||||
| C2 | 1uF | 1u | CP Radial D5.0mm P2.00mm | |
| C1 | 1uF | 1u | C Rect L7.0mm W2.0mm P5.00mm | |
| Transistors 1 | ||||
| Q1 | 2N5457 | 2N5457 | TO-92 Inline Wide-large-solderpads | |
| Potentiometers 2 | ||||
| LEVEL1 | 100K | 100k | 6mm-Trim-Pot | |
| BLEND1 | A100K | A100k | Potentiometer Alpha just holes | |
| Other 1 | ||||
| G*** | LOGO | LOGO | blend-me-up-logo | |