Enclosure not stated · 2 knobs
Old-style ring mod
- Category
- Ring Mod / Synth· Ring Modulators and Frequency Shifters
- Price
- see vendor
- Tags
- Ring Modulators and Frequency Shifters
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 27 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this schematic was not sure of
- R1/R2: drawn as variable resistors labeled R1/R2; trimmer vs panel pot not stated
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 470 | 470 | output filter series resistor, undesignated; read from the schematic by eye | |
| ×2 | 100k | 100k | undesignated; one per oscillator (feedback/bias); read from the schematic by eye | |
| ×2 | 2.7k | 2.7k | undesignated; oscillator 1 feedback and bias divider; read from the schematic by eye | |
| ×2 | 2.2k | 2.2k | undesignated; one per oscillator, to Tune pot; read from the schematic by eye | |
| ×2 | 4.7k | 4.7k | undesignated; one per oscillator; read from the schematic by eye | |
| Capacitors 5 | ||||
| ×1 | .1uF | 100n | output filter, undesignated; read from the schematic by eye | |
| ×1 | .05uF | 50n | output filter, undesignated; read from the schematic by eye | |
| ×2 | 4.7uF | 4.7u | electrolytic, carrier injection into R1/R2 wipers, undesignated; read from the schematic by eye | |
| ×2 | 100uF | 100u | electrolytic, supply decoupling and bias bypass, undesignated; read from the schematic by eye | |
| ×6 | .0036uF | 3.6n | undesignated; three per phase-shift oscillator; read from the schematic by eye | |
| Diodes 12 | ||||
| D1 | Diode | DIODE | no part number given; ring modulator 1; read from the schematic by eye | |
| D2 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D3 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D4 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D5 | Diode | DIODE | no part number given; ring modulator 2; read from the schematic by eye | |
| D6 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D7 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D8 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D9 | Diode | DIODE | no part number given; oscillator clipping pair; read from the schematic by eye | |
| D10 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D11 | Diode | DIODE | no part number given; read from the schematic by eye | |
| D12 | Diode | DIODE | no part number given; read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | LM324 | LM324 | one quad op amp; sections at pins 1-3 and 5-7 used as the two oscillators; read from the schematic by eye | |
| Potentiometers 2 | ||||
| Tune 1 | 10k | 10k | Potentiometer | read from the schematic by eye |
| Tune 2 | 10k | 10k | Potentiometer | read from the schematic by eye |
| Trimmers 2 | ||||
| R1 | 1K | 1k | variable resistor across ring 1 input, carrier fed to wiper; balance adjust; read from the schematic by eye | |
| R2 | 1K | 1k | variable resistor across ring 2 input, carrier fed to wiper; balance adjust; read from the schematic by eye | |