Enclosure not stated

Tube Sound Fuzz Modified

Schematic

Check before you build · 1 value the reader of this schematic was not sure of

Ref	Value	Normalized	Type	Notes
Resistors 5
×1	2k2	2.2k		read from the schematic by eye
×1	47k	47k		read from the schematic by eye
×1	470k	470k		read from the schematic by eye
×3	100k	100k		one input to the first inverter, two inverter feedback resistors; read from the schematic by eye
×2	3k9	3.9k		read from the schematic by eye
Capacitors 7
×2	10uF	10u		electrolytic; read from the schematic by eye
×2	0.1uF	100n		read from the schematic by eye
×1	510pF	510p		suggested value (*); read from the schematic by eye
×1	1500pF	1.5n		suggested value (*), Bright cap; read from the schematic by eye
×2	390pF	390p		suggested value (*); read from the schematic by eye
×2	4700pF	4.7n		read from the schematic by eye
×1	?	?		coupling cap between the two CD4049 stages, no value drawn; read from the schematic by eye
ICs 2
×1	?	?		any low-noise dual op amp; read from the schematic by eye
×1	CD4049	CD4049		hex inverter, two stages used; read from the schematic by eye
Potentiometers 3
×1	10k	10k	Potentiometer	unnamed pot after the first op amp (drive/level into the inverters); read from the schematic by eye
Tone	100k	100k	Potentiometer	dual-ganged; read from the schematic by eye
×1	10k	10k	Potentiometer	output volume, unnamed; read from the schematic by eye
Switches 1
Bright	SPST	SPST		read from the schematic by eye