Enclosure not stated
Mosrite FeedRite
Based on the Mosrite FeedRite
- Category
- Fuzz· Fuzz and Fuzzy Noisemakers
- Price
- see vendor
- Tags
- Fuzz and Fuzzy Noisemakers
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 8 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this schematic was not sure of
- SW: which of the two switches is the footswitch is inferred from the wiring; the 3-lug switch may be SPDT or the second pole is simply not drawn
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 1 | ||||
| ×4 | 470k | 470k | two collector loads, two base feedback resistors; read from the schematic by eye | |
| Capacitors 2 | ||||
| ×2 | .047uF | 47n | input coupling and feedback from Q1 collector to Q2 base; read from the schematic by eye | |
| ×2 | .0022uF | 2.2n | either side of the 470k lin blend pot; read from the schematic by eye | |
| Transistors 1 | ||||
| ×2 | BC184C | BC184C | NPN; read from the schematic by eye | |
| Potentiometers 3 | ||||
| ×1 | B470k | B470k | Potentiometer | drawn '470k lin.', unnamed; blends the two collector outputs (the Fuzz-Rite depth control); read from the schematic by eye |
| ×1 | A100k | A100k | Potentiometer | drawn '100k audio', unnamed; output volume; read from the schematic by eye |
| ×1 | A500k | A500k | Potentiometer | drawn '500k audio', unnamed; feedback loop amount; read from the schematic by eye |
| Switches 1 | ||||
| ×1 | SPDT | SPDT | toggle in the feedback loop wiring; the DPDT beside it is the bypass footswitch and is skipped; read from the schematic by eye | |