Enclosure not stated · 3 knobs
DOD FX52
Based on the DOD FX52 Classic Fuzz· 3 other boards clone it
- Category
- Fuzz· Fuzz and Fuzzy Noisemakers
- Price
- see vendor
- Tags
- Fuzz and Fuzzy Noisemakers
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 32 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| ×4 | 10K | 10k | input series, LF353 output, output-stage feed, LED driver collector; read from the schematic by eye | |
| ×1 | 470K | 470k | read from the schematic by eye | |
| ×1 | 3.9M | 3.9M | fuzz stage feedback; read from the schematic by eye | |
| ×2 | 220K | 220k | read from the schematic by eye | |
| ×1 | 18K | 18k | tone stage feedback; read from the schematic by eye | |
| ×3 | 3.3K | 3.3k | one at the Fuzz pot, two at the Tone pot; read from the schematic by eye | |
| ×1 | 1K | 1k | output; read from the schematic by eye | |
| ×1 | 100 | 100 | supply; read from the schematic by eye | |
| ×5 | 100K | 100k | bias divider x2, output pulldown, 4007 switching, transistor base; read from the schematic by eye | |
| ×5 | 1M | 1M | J113 switching x2, switching bias, 4007, transistor base pull-up; read from the schematic by eye | |
| Capacitors 12 | ||||
| ×1 | 103 | 10n | input coupling; read from the schematic by eye | |
| ×1 | 121 | 120p | input to ground; read from the schematic by eye | |
| ×2 | 120p | 120p | feedback caps on the LF353 stages; read from the schematic by eye | |
| ×5 | 1uF | 1u | electrolytic coupling; read from the schematic by eye | |
| ×1 | .001uF | 1n | across clipping diodes; read from the schematic by eye | |
| ×1 | .01uF | 10n | read from the schematic by eye | |
| ×2 | .047uF | 47n | read from the schematic by eye | |
| ×1 | 0.1uF | 100n | tone stage; read from the schematic by eye | |
| ×1 | .022uF | 22n | tone; read from the schematic by eye | |
| ×3 | 10uF | 10u | electrolytic: supply filter, J113 source bypass, tone; read from the schematic by eye | |
| ×1 | 330uF | 330u | electrolytic, Vcc filter; read from the schematic by eye | |
| ×1 | 47uF | 47u | electrolytic, bias filter; read from the schematic by eye | |
| Diodes 1 | ||||
| ×5 | Diode | DIODE | no part number given; supply protection, two clipping diodes, two in the J113 switching; read from the schematic by eye | |
| Transistors 2 | ||||
| ×2 | J113 | J113 | JFET switches; read from the schematic by eye | |
| ×1 | ? | ? | NPN LED driver, no part number given; read from the schematic by eye | |
| ICs 3 | ||||
| ×1 | 1458 | 1458 | dual op amp, input buffer and output buffer sections; read from the schematic by eye | |
| ×1 | LF353 | LF353 | dual op amp, fuzz and tone stages; read from the schematic by eye | |
| ×1 | 4007U | 4007U | CMOS switching for the footswitch logic; read from the schematic by eye | |
| Potentiometers 3 | ||||
| Fuzz | 100K | 100k | Potentiometer | read from the schematic by eye |
| Volume | 100K | 100k | Potentiometer | read from the schematic by eye |
| Tone | 100K | 100k | Potentiometer | read from the schematic by eye |
| LEDs 1 | ||||
| ×1 | LED | LED | read from the schematic by eye | |
Other boards based on the DOD FX52 Classic Fuzz
- DOD FX52 Classic Fuzz Dirtbox Layouts
- Classic 52 Fuzz PedalPCB · 125B · $8.00
- DOD FX52 - Classic Fuzz Tagboard Effects