Enclosure not stated · 1 knob
Analog Bit Crusher
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 20 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| R1 | 1M | 1M | read from the schematic by eye | |
| R2 | 1M | 1M | read from the schematic by eye | |
| R3 | 1M | 1M | read from the schematic by eye | |
| R4 | 1M | 1M | read from the schematic by eye | |
| R5 | 100k | 100k | read from the schematic by eye | |
| R6 | 22k | 22k | read from the schematic by eye | |
| R7 | 100k | 100k | read from the schematic by eye | |
| R8 | 100ohm | 100 | read from the schematic by eye | |
| R10 | 100k | 100k | read from the schematic by eye | |
| R11 | 100k | 100k | read from the schematic by eye | |
| Capacitors 5 | ||||
| C1 | .1uF | 100n | read from the schematic by eye | |
| C2 | .001uF | 1n | read from the schematic by eye | |
| C3 | .1uF | 100n | read from the schematic by eye | |
| C4 | .0033uF | 3.3n | read from the schematic by eye | |
| C5 | 10uF | 10u | electrolytic; read from the schematic by eye | |
| Diodes 2 | ||||
| D1 | 1N914 | 1N914 | per the note 'Diodes are 1n914'; read from the schematic by eye | |
| D2 | 1N914 | 1N914 | per the note 'Diodes are 1n914'; read from the schematic by eye | |
| Transistors 1 | ||||
| Q1 | J201 | J201 | JFET used as sample/hold switch; read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | ? | ? | op amps X1-X4 with no part number: one quad op amp, or (suggested) two duals, one for the buffers X1/X2 and one for the clock oscillator X3/X4; read from the schematic by eye | |
| Potentiometers 1 | ||||
| Frequency | 1M | 1M | Potentiometer | R9, drawn '1M-2M', wired as a variable resistor; 2M or more gives a lower frequency range; read from the schematic by eye |