Enclosure not stated · 2 knobs

Voodoo Lab Overdrive

Based on the Voodoo Lab Overdrive· 6 other boards clone it

Schematic

Check before you build · 1 value the reader of this schematic was not sure of

Ref	Value	Normalized	Type	Notes
Resistors 5
×3	10k	10k		input, between stages (2); read from the schematic by eye
×2	470k	470k		feedback, input bias; read from the schematic by eye
×3	47k	47k		bias divider (2), second stage to ground; read from the schematic by eye
×1	150k	150k		second stage feedback; read from the schematic by eye
×1	250	250		output series, marked *: 1% bands red-green-black-black-red, drawn '250Ω?'; read from the schematic by eye
Capacitors 6
×1	.01uF	10n		input; read from the schematic by eye
×1	.1uF	100n		Gain leg; read from the schematic by eye
×2	220pF	220p		feedback caps; read from the schematic by eye
×1	.001uF	1n		across clipping diodes; read from the schematic by eye
×1	100uF	100u		bias filter; read from the schematic by eye
×2	2.2uF	2.2u		output coupling, second stage to ground; read from the schematic by eye
Diodes 1
×2	1N4148	1N4148		clipping, antiparallel; read from the schematic by eye
ICs 1
×1	TL072CN	TL072CN		dual op amp; read from the schematic by eye
Potentiometers 2
Gain	500k	500k	Potentiometer	read from the schematic by eye
Volume	100k	100k	Potentiometer	read from the schematic by eye