Enclosure not stated · 3 knobs
Ibanez TS9
Based on the Ibanez TS9 Tube Screamer· 4 other boards clone it
- Category
- Distortion· Distortion Boost and Overdrive
- Price
- see vendor
- Tags
- Distortion Boost and Overdrive
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 39 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 18 | ||||
| ×6 | 10k | 10k | input emitter, 4.5V feedback leg, tone node, output emitter, bias divider (2); read from the schematic by eye | |
| ×4 | 1k | 1k | input, op amp 1 output, tone feedback, output series; read from the schematic by eye | |
| ×4 | 510k | 510k | input bias, JFET gates (2), output buffer bias; read from the schematic by eye | |
| ×1 | 4.7k | 4.7k | read from the schematic by eye | |
| ×1 | 51k | 51k | Drive series; read from the schematic by eye | |
| ×1 | 220 | 220 | tone, drawn '220ohms'; read from the schematic by eye | |
| ×1 | 470 | 470 | output, drawn '470ohms'; read from the schematic by eye | |
| ×1 | 100k | 100k | output pulldown; read from the schematic by eye | |
| ×2 | 1M | 1M | marked * on the drawing: the note says these may be 22k on the original; read from the schematic by eye | |
| ×2 | 56k | 56k | marked * on the drawing: the note says these may be 10k on the original; read from the schematic by eye | |
| ×2 | 56k | 56k | flip-flop base resistors; read from the schematic by eye | |
| ×2 | 56k | 56k | inside cr1 and cr2 (56k parallel with 51p, per note); read from the schematic by eye | |
| ×1 | 62k | 62k | read from the schematic by eye | |
| ×1 | 22k | 22k | read from the schematic by eye | |
| ×2 | 1M | 1M | flip-flop and LED driver base; read from the schematic by eye | |
| ×1 | 22 | 22 | footswitch line; read from the schematic by eye | |
| ×1 | 3.6k | 3.6k | LED; read from the schematic by eye | |
| ×1 | 100 | 100 | flip-flop emitters; read from the schematic by eye | |
| Capacitors 12 | ||||
| ×1 | .02uF | 20n | input; read from the schematic by eye | |
| ×2 | 1uF | 1u | 50V non-polarized; read from the schematic by eye | |
| ×2 | 0.1uF | 100n | read from the schematic by eye | |
| ×1 | 51pF | 51p | clipping feedback; read from the schematic by eye | |
| ×2 | 51pF | 51p | inside cr1 and cr2, per note; read from the schematic by eye | |
| ×1 | .047uF | 47n | drawn .047u, Drive leg; read from the schematic by eye | |
| ×2 | 0.22uF | 220n | tantalum; read from the schematic by eye | |
| ×2 | .047uF | 47n | JFET gate timing; read from the schematic by eye | |
| ×1 | 47uF | 47u | 4.5V filter; read from the schematic by eye | |
| ×1 | 100uF | 100u | supply filter; read from the schematic by eye | |
| ×2 | 1000pF | 1n | read from the schematic by eye | |
| ×1 | 10uF | 10u | output; read from the schematic by eye | |
| Diodes 2 | ||||
| ×6 | 1N914 | 1N914 | clipping (2), JFET gates (2), flip-flop emitter, supply; note says silicon signal diodes 1N914 or similar; read from the schematic by eye | |
| ×1 | 3V | 3V | zener; read from the schematic by eye | |
| Transistors 2 | ||||
| ×5 | 2SC1815 | 2SC1815 | input and output buffers, flip-flop (2), LED driver; read from the schematic by eye | |
| ×2 | 2SK30A | 2SK30A | JFET bypass switches; read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | 4558 | 4558 | dual op amp; read from the schematic by eye | |
| Potentiometers 3 | ||||
| Drive | 500k | 500k | Potentiometer | read from the schematic by eye |
| Tone | 20k | 20k | Potentiometer | read from the schematic by eye |
| Level | 100k | 100k | Potentiometer | read from the schematic by eye |
| LEDs 1 | ||||
| ×1 | LED | LED | read from the schematic by eye | |
Other boards based on the Ibanez TS9 Tube Screamer
- Ibanez TS9 Tube Screamer Effects Layouts (blog) · 1590B
- Ibanez TS9 Tagboard Effects
- Ibanez TS9 without output buffer Tagboard Effects
- Ibanez TS9 Tube Screamer turretboard.org