Enclosure not stated · 3 knobs
Ibanez TS-10
Based on the Ibanez TS-10
- Category
- Distortion· Distortion Boost and Overdrive
- Price
- see vendor
- Tags
- Distortion Boost and Overdrive
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 43 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this schematic was not sure of
- 9.2k: printed 9.2k (unusual value) at the Q1 bias divider
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 15 | ||||
| ×5 | 1k | 1k | read from the schematic by eye | |
| ×8 | 10k | 10k | read from the schematic by eye | |
| ×7 | 510k | 510k | read from the schematic by eye | |
| ×3 | 22k | 22k | read from the schematic by eye | |
| ×4 | 1M | 1M | read from the schematic by eye | |
| ×2 | 220 | 220 | read from the schematic by eye | |
| ×1 | 9.2k | 9.2k | read from the schematic by eye | |
| ×1 | 4.7k | 4.7k | read from the schematic by eye | |
| ×1 | 51k | 51k | read from the schematic by eye | |
| ×1 | 470 | 470 | read from the schematic by eye | |
| ×1 | 100k | 100k | read from the schematic by eye | |
| ×1 | 62k | 62k | read from the schematic by eye | |
| ×1 | 22 | 22 | read from the schematic by eye | |
| ×1 | 3.6k | 3.6k | read from the schematic by eye | |
| ×1 | 100 | 100 | read from the schematic by eye | |
| Capacitors 10 | ||||
| ×1 | 0.02uF | 20n | read from the schematic by eye | |
| ×2 | 10uF | 10u | 16V electrolytic; read from the schematic by eye | |
| ×3 | 1uF | 1u | 50V non-polar; read from the schematic by eye | |
| ×1 | 51pF | 51p | read from the schematic by eye | |
| ×3 | 47n | 47n | read from the schematic by eye | |
| ×2 | 0.22uF | 220n | tantalum; read from the schematic by eye | |
| ×2 | 0.1uF | 100n | read from the schematic by eye | |
| ×1 | 100uF | 100u | 16V; read from the schematic by eye | |
| ×1 | 47uF | 47u | 16V; read from the schematic by eye | |
| ×3 | 1n | 1n | read from the schematic by eye | |
| Diodes 3 | ||||
| D1 | 1N4001 | 1N4001 | polarity protection; read from the schematic by eye | |
| ×5 | 1N914 | 1N914 | signal diodes (2 clipping, 2 at the JFET gates, 1 in the flip-flop emitter return); read from the schematic by eye | |
| ×1 | ZW3 | ZW3 | 3V zener in the LED line; read from the schematic by eye | |
| Transistors 8 | ||||
| Q1 | 2SC1815 | 2SC1815 | read from the schematic by eye | |
| Q2 | 2SC1815 | 2SC1815 | read from the schematic by eye | |
| Q3 | 2SC1815 | 2SC1815 | read from the schematic by eye | |
| Q4 | 2SC1815 | 2SC1815 | read from the schematic by eye | |
| Q5 | 2SC1815 | 2SC1815 | read from the schematic by eye | |
| Q6 | 2SC1815 | 2SC1815 | read from the schematic by eye | |
| Q7 | 2SK118 | 2SK118 | JFET switch; read from the schematic by eye | |
| Q8 | 2SK118 | 2SK118 | JFET switch; read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | NJM4558 | NJM4558 | dual op amp; note prints 'NJZ4558' (author used RC4558); read from the schematic by eye | |
| Potentiometers 3 | ||||
| Drive | 500k | 500k | Potentiometer | read from the schematic by eye |
| Tone | 20k | 20k | Potentiometer | read from the schematic by eye |
| Level | 100k | 100k | Potentiometer | read from the schematic by eye |
| LEDs 1 | ||||
| ×1 | LED | LED | indicator; read from the schematic by eye | |
| Other 2 | ||||
| CR1 | 56k||51pF | 56K||51PF | custom component: 56k resistor and 51p capacitor in parallel; read from the schematic by eye | |
| CR2 | 56k||51pF | 56K||51PF | custom component: 56k resistor and 51p capacitor in parallel; read from the schematic by eye | |