Enclosure not stated
Ibanez MS10
Based on the Ibanez MS10
- Category
- Distortion· Distortion Boost and Overdrive
- Price
- see vendor
- Tags
- Distortion Boost and Overdrive
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 120 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 7 values the reader of this schematic was not sure of
- C36: designator read as C36, could be C34
- C18: 3.6N could be 5.6N
- C10: 100pF small and faint
- R41: 56 ohm vs 56K (R43 beside it is 56K)
- D10: designator partly illegible
- C30/C31: one 1N label drawn between both
- CR1/CR2: value not given
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 54 | ||||
| R1 | 10K | 10k | read from the schematic by eye | |
| R2 | 1M | 1M | read from the schematic by eye | |
| R3 | 10K | 10k | read from the schematic by eye | |
| R4 | 100 | 100 | 100 ohm; read from the schematic by eye | |
| R5 | 1M | 1M | read from the schematic by eye | |
| R6 | 510K | 510k | read from the schematic by eye | |
| R7 | 510K | 510k | read from the schematic by eye | |
| R8 | 1K | 1k | read from the schematic by eye | |
| R9 | 10K | 10k | designator clash: R9 also drawn as 230 ohm on the Attack pot wiper; read from the schematic by eye | |
| R9b | 230 | 230 | 230 ohm; drawn as a second R9; read from the schematic by eye | |
| R10 | 1K | 1k | read from the schematic by eye | |
| R11 | 4.7K | 4.7k | read from the schematic by eye | |
| R12 | 4.7K | 4.7k | read from the schematic by eye | |
| R13 | 4.7K | 4.7k | read from the schematic by eye | |
| R14 | 220K | 220k | read from the schematic by eye | |
| R15 | 10K | 10k | read from the schematic by eye | |
| R16 | 100K | 100k | read from the schematic by eye | |
| R17 | 10K | 10k | read from the schematic by eye | |
| R18 | 10K | 10k | read from the schematic by eye | |
| R19 | 15K | 15k | read from the schematic by eye | |
| R20 | 10K | 10k | read from the schematic by eye | |
| R22 | 4.7K | 4.7k | read from the schematic by eye | |
| R23 | 4.7K | 4.7k | read from the schematic by eye | |
| R25 | 100K | 100k | read from the schematic by eye | |
| R26 | 820 | 820 | 820 ohm; read from the schematic by eye | |
| R27 | 100K | 100k | read from the schematic by eye | |
| R33 | 510K | 510k | read from the schematic by eye | |
| R34 | 510K | 510k | designator clash: R34 also drawn as 470 ohm at the output; read from the schematic by eye | |
| R34b | 470 | 470 | 470 ohm output resistor; drawn as a second R34; read from the schematic by eye | |
| R36 | 100K | 100k | read from the schematic by eye | |
| R37 | 62K | 62k | read from the schematic by eye | |
| R38 | 22K | 22k | read from the schematic by eye | |
| R39 | 1M | 1M | read from the schematic by eye | |
| R40 | 39K | 39k | read from the schematic by eye | |
| R41 | 56 | 56 | 56 ohm as drawn; read from the schematic by eye | |
| R42 | 22 | 22 | 22 ohm; read from the schematic by eye | |
| R43 | 56K | 56k | read from the schematic by eye | |
| R44 | 56K | 56k | read from the schematic by eye | |
| R45 | 100 | 100 | 100 ohm; read from the schematic by eye | |
| R46 | 1M | 1M | read from the schematic by eye | |
| R47 | 3.6K | 3.6k | read from the schematic by eye | |
| R50 | 10K | 10k | read from the schematic by eye | |
| R51 | 10K | 10k | read from the schematic by eye | |
| R52 | 100 | 100 | 100 ohm, supply filter; read from the schematic by eye | |
| R53 | 100 | 100 | 100 ohm, supply filter; read from the schematic by eye | |
| R54 | 100 | 100 | 100 ohm, supply filter; read from the schematic by eye | |
| R55 | 100 | 100 | 100 ohm, supply filter; read from the schematic by eye | |
| R58 | 10K | 10k | read from the schematic by eye | |
| ×2 | 510K | 510k | no designator: drain resistors of the two FET switches; read from the schematic by eye | |
| ×2 | 1M | 1M | no designator: gate resistors of the two FET switches; read from the schematic by eye | |
| ×3 | 10K | 10k | no designator: TR2 emitter and the 4.5V divider pair; read from the schematic by eye | |
| ×1 | 4.7K | 4.7k | no designator (marked ?): IC4B input; read from the schematic by eye | |
| ×1 | 220 | 220 | no designator (marked ?): 220 ohm from Edge pot wiper; read from the schematic by eye | |
| ×1 | 1.5K | 1.5k | no designator: IC3A Mid stage; read from the schematic by eye | |
| Capacitors 37 | ||||
| C1 | 47N | 47n | read from the schematic by eye | |
| C3 | 1uF | 1u | read from the schematic by eye | |
| C4 | 1uF | 1u | read from the schematic by eye | |
| C5 | 220N | 220n | read from the schematic by eye | |
| C6 | 33N | 33n | read from the schematic by eye | |
| C8 | 100pF | 100p | read from the schematic by eye | |
| C9 | 22uF | 22u | read from the schematic by eye | |
| C10 | 100pF | 100p | read from the schematic by eye | |
| C11 | 220N | 220n | designator clash: C11 also drawn as 1uF at IC2A output; read from the schematic by eye | |
| C11b | 1uF | 1u | IC2A output cap; drawn as a second C11; read from the schematic by eye | |
| C12 | 1N | 1n | read from the schematic by eye | |
| C13 | 1uF | 1u | read from the schematic by eye | |
| C14 | 10N | 10n | read from the schematic by eye | |
| C15 | 10N | 10n | read from the schematic by eye | |
| C17 | 30pF | 30p | read from the schematic by eye | |
| C18 | 3.6N | 3.6n | read from the schematic by eye | |
| C19 | 56N | 56n | read from the schematic by eye | |
| C20 | 2.2N | 2.2n | read from the schematic by eye | |
| C21 | 47N | 47n | read from the schematic by eye | |
| C23 | 1uF | 1u | read from the schematic by eye | |
| C26 | 1.2N | 1.2n | read from the schematic by eye | |
| C28 | 100N | 100n | read from the schematic by eye | |
| C29 | 10uF | 10u | read from the schematic by eye | |
| C30 | 1N | 1n | read from the schematic by eye | |
| C31 | 1N | 1n | read from the schematic by eye | |
| C32 | 1N | 1n | read from the schematic by eye | |
| C33 | 100uF | 100u | read from the schematic by eye | |
| C36 | 1uF | 1u | read from the schematic by eye | |
| C37 | 1uF | 1u | read from the schematic by eye | |
| C38 | 1uF | 1u | read from the schematic by eye | |
| C39 | 1uF | 1u | read from the schematic by eye | |
| C40 | 1uF | 1u | read from the schematic by eye | |
| ×1 | 100N | 100n | no designator: FET switch input; read from the schematic by eye | |
| ×2 | 47N | 47n | no designator: FET switch gate caps; read from the schematic by eye | |
| ×1 | 1uF | 1u | no designator: FET switch output to A; read from the schematic by eye | |
| ×1 | 1uF | 1u | no designator (marked ?): IC4B input; read from the schematic by eye | |
| ×2 | 47uF | 47u | no designator: supply/4.5V reference filter; read from the schematic by eye | |
| Diodes 11 | ||||
| D1 | Si | SI | drawn Si (silicon), no part number; read from the schematic by eye | |
| D2 | Si | SI | read from the schematic by eye | |
| D4 | Si | SI | read from the schematic by eye | |
| D5 | Si | SI | read from the schematic by eye | |
| D6 | Si | SI | read from the schematic by eye | |
| D7 | Diode | DIODE | no part number given; polarity protection; read from the schematic by eye | |
| D8 | Si | SI | read from the schematic by eye | |
| D9 | Si | SI | read from the schematic by eye | |
| D10 | Si | SI | designator partly legible; read from the schematic by eye | |
| D11 | Si | SI | read from the schematic by eye | |
| D12 | 3V zener | 3V | marked 4781; read from the schematic by eye | |
| Transistors 5 | ||||
| TR1 | C2458 | 2SC2458 | 2SC2458 per the note; read from the schematic by eye | |
| TR2 | C2458 | 2SC2458 | read from the schematic by eye | |
| Q1 | ? | ? | FET (drawn as JFET) switch; read from the schematic by eye | |
| ×2 | ? | ? | no designator: FET switches in the top section; read from the schematic by eye | |
| ×3 | C2458 | 2SC2458 | no designator: flip-flop pair and LED driver; 'all transistors are C2458'; read from the schematic by eye | |
| ICs 4 | ||||
| IC1 | JRC4558D | JRC4558D | read from the schematic by eye | |
| IC2 | JRC4558D | JRC4558D | read from the schematic by eye | |
| IC3 | JRC4558D | JRC4558D | read from the schematic by eye | |
| IC4 | JRC4558D | JRC4558D | read from the schematic by eye | |
| Potentiometers 5 | ||||
| Attack | 20K | 20k | Potentiometer | VR1, labeled Tone; read from the schematic by eye |
| Distortion | 100K | 100k | Potentiometer | VR2, labeled Gain; read from the schematic by eye |
| Punch | 100K | 100k | Potentiometer | VR3, labeled Low EQ; read from the schematic by eye |
| Edge | 20K | 20k | Potentiometer | VR5, labeled Mid+High EQ; read from the schematic by eye |
| VR5b | 10K | 10k | Potentiometer | output level pot; drawn as a second VR5; read from the schematic by eye |
| LEDs 2 | ||||
| D3 | LED | LED | clipping LED in IC2A feedback; read from the schematic by eye | |
| D13 | LED | LED | status LED; read from the schematic by eye | |
| Other 2 | ||||
| CR1 | ? | ? | RC network block; a sketch beside CR2 shows a 10K resistor with a capacitor (value ?); read from the schematic by eye | |
| CR2 | ? | ? | RC network block, see CR1; read from the schematic by eye | |