Enclosure not stated · 4 knobs
DOD FX70-C Corrosion
Based on the DOD FX70-C Corrosion· 3 other boards clone it
- Category
- Distortion· Distortion Boost and Overdrive
- Price
- see vendor
- Tags
- Distortion Boost and Overdrive
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 106 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 5 values the reader of this schematic was not sure of
- R1 (second): drawn '10', may be a misdrawn value
- Q4: drawn J11, probably J111 or J113
- C26, Ce: drawn with '?' after .05u
- R26 and C24: no values drawn
- unlabeled diode beside Dc: type assumed 1N4148
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 49 | ||||
| R1 | 470 | 470 | Rust gain leg to Cb. Designator clash: R1 also drawn as the 10 ohm at IC1A pin 3; read from the schematic by eye | |
| R1 | 10 | 10 | IC1A pin 3 to Vbias; clash with the 470 R1; value drawn '10', possibly a dropped digit; read from the schematic by eye | |
| R2 | 1M | 1M | footswitch pull-up to V+. Designator clash: R2 also drawn as the 2K to C24; read from the schematic by eye | |
| R2 | 2K | 2k | Top pot wiper to C24; clash with the 1M R2; read from the schematic by eye | |
| R3 | 1K | 1k | read from the schematic by eye | |
| R4 | 22K | 22k | read from the schematic by eye | |
| R5 | 3.3K | 3.3k | read from the schematic by eye | |
| R6 | 220K | 220k | read from the schematic by eye | |
| R7 | 2K | 2k | read from the schematic by eye | |
| R9 | 100K | 100k | read from the schematic by eye | |
| R10 | 100K | 100k | read from the schematic by eye | |
| R11 | 100K | 100k | Q4 output to Vbias. Designator clash: R11 also drawn as the 100K at Q10; read from the schematic by eye | |
| R11 | 100K | 100k | Q10 to Vbias; clash with the other R11; read from the schematic by eye | |
| R12 | 10K | 10k | read from the schematic by eye | |
| R13 | 10K | 10k | read from the schematic by eye | |
| R15 | 10K | 10k | read from the schematic by eye | |
| R16 | 2K | 2k | read from the schematic by eye | |
| R17 | 100K | 100k | read from the schematic by eye | |
| R19 | 3.3K | 3.3k | read from the schematic by eye | |
| R20 | 4.7K | 4.7k | read from the schematic by eye | |
| R23 | 47K | 47k | Q5 base bias. Designator clash: R23 also drawn as the 100K at U4; read from the schematic by eye | |
| R23 | 100K | 100k | U4 pin 13; clash with the 47K R23; read from the schematic by eye | |
| R24 | 10K | 10k | read from the schematic by eye | |
| R25 | 100K | 100k | IC1B pin 5 to Vbias. Designator clash: R25 also drawn as the 1M at U4 pin 12; read from the schematic by eye | |
| R25 | 1M | 1M | U4 pin 12 to LED driver; clash with the 100K R25; read from the schematic by eye | |
| R26 | ? | ? | LED driver base to ground; no value drawn; read from the schematic by eye | |
| R26 | 1K | 1k | Q7 emitter feedback; clash with the other R26; read from the schematic by eye | |
| R27 | 10K | 10k | read from the schematic by eye | |
| R28 | 47K | 47k | read from the schematic by eye | |
| R29 | 10K | 10k | read from the schematic by eye | |
| R29 | 220K | 220k | C15/diode to output bus; designator clash with the 10K R29 (LED); read from the schematic by eye | |
| R30 | 220K | 220k | read from the schematic by eye | |
| R31 | 10K | 10k | read from the schematic by eye | |
| R32 | 10K | 10k | read from the schematic by eye | |
| R33 | 10K | 10k | read from the schematic by eye | |
| R34 | 10K | 10k | read from the schematic by eye | |
| R39 | 100K | 100k | read from the schematic by eye | |
| R40 | 10K | 10k | read from the schematic by eye | |
| R41 | 100K | 100k | read from the schematic by eye | |
| R44 | 100 | 100 | read from the schematic by eye | |
| R46 | 10K | 10k | Q3 emitter. Designator R46 is printed three times (10K and two 100K); read from the schematic by eye | |
| R46 | 100K | 100k | C29 to Vbias; clash with the other R46s; read from the schematic by eye | |
| R46 | 100K | 100k | output pulldown after C32; clash with the other R46s; read from the schematic by eye | |
| R47 | 10K | 10k | read from the schematic by eye | |
| R49 | 10K | 10k | read from the schematic by eye | |
| R50 | 10K | 10k | read from the schematic by eye | |
| R52 | 100 | 100 | read from the schematic by eye | |
| ×1 | 10K | 10k | drawn R?; Q8 emitter to ground; read from the schematic by eye | |
| ×1 | 330 | 330 | drawn R?; Q8 emitter to C18; read from the schematic by eye | |
| Capacitors 33 | ||||
| C1 | 120pF | 120p | drawn 120p; read from the schematic by eye | |
| C2 | .05uF | 50n | printed '2C'; drawn .05u; read from the schematic by eye | |
| C3 | 1uF | 1u | electrolytic; read from the schematic by eye | |
| C5 | 100pF | 100p | drawn 100p; read from the schematic by eye | |
| C6 | .027uF | 27n | drawn .027u; read from the schematic by eye | |
| C7 | .01uF | 10n | drawn .01u; read from the schematic by eye | |
| C9 | .033uF | 33n | drawn .033; read from the schematic by eye | |
| C10 | 50pF | 50p | IC1A feedback, drawn 50p. Designator clash: C10 also drawn as the .05uF at U4 pin 12; read from the schematic by eye | |
| C10 | .05uF | 50n | U4 pin 12; clash with the 50p C10; read from the schematic by eye | |
| C12 | 10uF | 10u | electrolytic, drawn 10u; read from the schematic by eye | |
| C13 | .016uF | 16n | drawn .016u; read from the schematic by eye | |
| C14 | 0.22uF | 220n | drawn 0.22u; read from the schematic by eye | |
| C15 | 0.05uF | 50n | drawn 0.05u; read from the schematic by eye | |
| C17 | 1uF | 1u | electrolytic; read from the schematic by eye | |
| C18 | 0.33uF | 330n | electrolytic, drawn 0.33u; read from the schematic by eye | |
| C19 | .016uF | 16n | drawn .016u; read from the schematic by eye | |
| C20 | .0015uF | 1.5n | drawn .0015u; read from the schematic by eye | |
| C23 | 50pF | 50p | drawn 50p; read from the schematic by eye | |
| C24 | ? | ? | Top pot network to ground; no value drawn; read from the schematic by eye | |
| C25 | 0.22uF | 220n | drawn 0.22u; read from the schematic by eye | |
| C26 | .05uF | 50n | drawn .05u? (the drawing's own question mark); read from the schematic by eye | |
| C27 | 10uF | 10u | electrolytic; read from the schematic by eye | |
| C28 | 0.22uF | 220n | drawn 0.22u; read from the schematic by eye | |
| C29 | 0.22uF | 220n | drawn 0.22u; read from the schematic by eye | |
| C32 | 10uF | 10u | electrolytic; read from the schematic by eye | |
| C33 | 330uF | 330u | electrolytic, supply; read from the schematic by eye | |
| C34 | 330uF | 330u | electrolytic, Vbias; read from the schematic by eye | |
| Ca | .05uF | 50n | drawn .05u; read from the schematic by eye | |
| Cb | 10uF | 10u | electrolytic, drawn 10u; read from the schematic by eye | |
| Cd | 50pF | 50p | drawn 50p; read from the schematic by eye | |
| Ce | .05uF | 50n | drawn .05u? (the drawing's own question mark); read from the schematic by eye | |
| ×1 | .05uF | 50n | drawn C?; at the D? junction to ground; read from the schematic by eye | |
| ×1 | 0.015uF | 15n | no designator; IC1B input coupling, drawn 0.015u; read from the schematic by eye | |
| Diodes 5 | ||||
| Dc | 1N4148 | 1N4148 | clipping diode to ground; read from the schematic by eye | |
| Dd | 1N4148 | 1N4148 | to IC4 pin 8; read from the schematic by eye | |
| ×1 | 1N4148 | 1N4148 | drawn D?; Q2 gate; read from the schematic by eye | |
| ×1 | 1N4148 | 1N4148 | no designator, drawn N4148; Q4 gate; read from the schematic by eye | |
| ×1 | 1N4148 | 1N4148 | no designator; paired with Dc to ground, type assumed same as Dc; read from the schematic by eye | |
| Transistors 10 | ||||
| Q1 | J201 | J201 | read from the schematic by eye | |
| Q2 | J113 | J113 | read from the schematic by eye | |
| Q3 | 2N5088 | 2N5088 | buffer after R32. Designator clash: Q3 also drawn as the LED driver; read from the schematic by eye | |
| Q3 | 2N5088 | 2N5088 | LED driver; clash with the other Q3; read from the schematic by eye | |
| Q4 | J111 | J111 | drawn J11 (digit missing), probably J111 or J113; read from the schematic by eye | |
| Q5 | 2N5088 | 2N5088 | read from the schematic by eye | |
| Q7 | 2N5088 | 2N5088 | read from the schematic by eye | |
| Q8 | 2N5088 | 2N5088 | read from the schematic by eye | |
| Q9 | 2N5088 | 2N5088 | read from the schematic by eye | |
| Q10 | J113 | J113 | read from the schematic by eye | |
| ICs 4 | ||||
| IC1 | 4558 | 4558 | dual op amp (IC1A, IC1B); read from the schematic by eye | |
| IC2 | 4558 | 4558 | dual op amp (only IC2A drawn); read from the schematic by eye | |
| IC3 | 4558 | 4558 | dual op amp (IC3A, IC3B); read from the schematic by eye | |
| U4 | 4007 | 4007 | CD4007 electronic bypass; read from the schematic by eye | |
| Potentiometers 4 | ||||
| Rust | 100K | 100k | Potentiometer | P1; read from the schematic by eye |
| Top | 100K | 100k | Potentiometer | P2; read from the schematic by eye |
| Bottom | 100K | 100k | Potentiometer | P3; read from the schematic by eye |
| Dissolve | 100K | 100k | Potentiometer | P4; read from the schematic by eye |
| LEDs 1 | ||||
| D6 | LED | LED | read from the schematic by eye | |
Other boards based on the DOD FX70-C Corrosion
- DOD FX70C Corrosion Distortion Dirtbox Layouts
- DOD FX70-C Corrosion Experimentalists Anonymous
- DOD FX70C Corrosion Tagboard Effects