Enclosure not stated
Dan Armstrong Blue Clipper
- Category
- Distortion· Distortion Boost and Overdrive
- Price
- see vendor
- Tags
- Distortion Boost and Overdrive
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 12 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this schematic was not sure of
- Output pot: drawn '50k ?' — the author was unsure of the value
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 20k | 20k | bias divider to V+; read from the schematic by eye | |
| ×2 | 240k | 240k | bias divider to ground and op amp feedback leg to ground; read from the schematic by eye | |
| ×1 | 150k | 150k | op amp feedback; read from the schematic by eye | |
| ×1 | 8.2k | 8.2k | series after output cap; read from the schematic by eye | |
| ×1 | 10k | 10k | into output pot; read from the schematic by eye | |
| Capacitors 3 | ||||
| ×1 | .047uF | 47n | input; read from the schematic by eye | |
| ×2 | 4.7uF | 4.7u | electrolytic: output coupling and feedback leg to ground; read from the schematic by eye | |
| ×1 | .033uF | 33n | tone cap to ground; read from the schematic by eye | |
| Diodes 2 | ||||
| D1 | Diode | DIODE | no part number given; 'pick an element'; read from the schematic by eye | |
| D2 | Diode | DIODE | no part number given; 'pick an element'; read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | 4558 | 4558 | dual op amp, one section used; read from the schematic by eye | |
| Potentiometers 1 | ||||
| ×1 | 50k | 50k | Potentiometer | output level pot, value drawn '50k ?'; read from the schematic by eye |