Enclosure not stated · 2 knobs

Colorsound Supasustain

Based on the Colorsound Supa Sustain· 2 other boards clone it

Schematic

Ref	Value	Normalized	Type	Notes
Resistors 10
×1	82k	82k		read from the schematic by eye
×3	220k	220k		read from the schematic by eye
×1	22k	22k		read from the schematic by eye
×1	47k	47k		output, before Volume; read from the schematic by eye
×1	1.5k	1.5k		read from the schematic by eye
×1	1k	1k		below Sensitivity pot; read from the schematic by eye
×1	4.7k	4.7k		read from the schematic by eye
×1	1.8k	1.8k		read from the schematic by eye
×2	100ohm	100		one in series with the LDR, one at the second LED-driver emitter; read from the schematic by eye
×1	470ohm	470		LED series resistor; read from the schematic by eye
Capacitors 5
×1	33uF	33u		electrolytic, 18V supply filter; read from the schematic by eye
×1	10uF	10u		electrolytic; read from the schematic by eye
×2	0.047uF	47n		read from the schematic by eye
×1	0.1uF	100n		input; read from the schematic by eye
×2	1uF	1u		non-polar (NP); read from the schematic by eye
Transistors 1
×4	BC169B	BC169B		all transistors BC169B; read from the schematic by eye
Opto 1
×1	LDR	LDR		mounted with the LED in shrink tube; read from the schematic by eye
Potentiometers 2
Sensitivity	A100K	A100k	Potentiometer	drawn '100k log b'; read from the schematic by eye
Volume	A100K	A100k	Potentiometer	drawn '100k log b'; read from the schematic by eye
LEDs 1
×1	red LED	RED LED		6mm, mounted with the LDR in shrink tube; read from the schematic by eye