Enclosure not stated · 3 knobs
Casio PT10
- Category
- Other· Circuit Bending and Modifications
- Controls
- High Pass · Sub-Octave · Clock Glitch
- Price
- see vendor
- Tags
- Circuit Bending and Modifications
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 7 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 2 values the reader of this schematic was not sure of
- 2.2k: drawn with a question mark
- ×3 SW: the looped symbol shunting the resistors is not standard; read as a bypass switch
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| ×2 | 5.6k | 5.6k | one in series with the High Pass Filter pot, one with the Sub-Octave pot; read from the schematic by eye | |
| ×1 | 2.2k | 2.2k | Squeaky Clock Glitch; drawn '2.2k?'; read from the schematic by eye | |
| ×2 | ? | ? | no value given: 'Repeating note' bend ('experiment with resistance values') and 'Strange Distortion' bend ('try different resistors, or a low value pot'); read from the schematic by eye | |
| Potentiometers 3 | ||||
| High Pass | 10k | 10k | Potentiometer | drawn 'Try 10k'; read from the schematic by eye |
| Sub-Octave | 5k | 5k | Potentiometer | drawn 'Try 5k'; read from the schematic by eye |
| Clock Glitch | ? | ? | Potentiometer | no value given; read from the schematic by eye |
| Switches 1 | ||||
| ×3 | SPST | SPST | drawn as a looped-wire symbol across the resistor (bypass); read as an on/off switch; read from the schematic by eye | |