Sasquatch II

From the vendor

It was time to give the SASQUATCH a little update. The main difference over the old version is the added blend function to the octave section. The rest of the circuit remains unchanged with a (now blend-able) octave, based on the Green Ringer, pushing a germanium/silicon hybrid Big Muff variant with a 2-band EQ.

Build doc

Note: The O1 and O2 pads for the fuzz footswitch are mislabeled and will need to be swapped. O1 is supposed be the octave circuit input, but instead goes to the In jack tip pad. O2 is supposed to go to the In jack tip, but is actually the octave circuit input. When wiring to the included 3PDT footswitch boards, O1 will go to pad 2 and O2 will go to pad 2. This is fixed in the “Rev1” boards, so if you have a board that says “Rev1” on the backside, disregard this and wire to the footswitch boards as usual.

The company and product names used in this web site are for identification purposes only and are not affiliated with EFFECTS LAYOUTS, LLC in any way. All trademarks and registered trademarks are the property of their respective owners.

Original design inspired by the EHX Big Muff