Enclosure not stated
From the vendor
If you’ve ever built a pedal and wish it had a balanced output this is the perfect add on. This mounts directly onto a 3PDT footswitch allowing you to bypass the effect as normal with the output going through an always-on active DI circuit. You can connect this to either a TRS or XLR jack.
The company and product names used in this web site are for identification purposes only and are not affiliated with EFFECTS LAYOUTS, LLC in any way. All trademarks and registered trademarks are the property of their respective owners.
Balanced Out Footswitch Board
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 15 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 8 | ||||
| R1 | 100k | 100k | ||
| R2 | 2.2k | 2.2k | ||
| R3 | 10k | 10k | ||
| R4 | 10k | 10k | ||
| R5 | 100Ω | 100 | ||
| R6 | 100Ω | 100 | ||
| R7 | 10k | 10k | ||
| R8 | 10k | 10k | ||
| Capacitors 5 | ||||
| C2 | 10µ | 10u | ||
| C3 | 10µ | 10u | ||
| C4 | 100µ | 100u | ||
| C5 | 10µ | 10u | ||
| C1 | 1µ | 1u | ||
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | ||
| ICs 1 | ||||
| IC1 | TL072 | TL072 | ||