Akashic Guitar effects circuit lookup
REVERB

1590B · 1 knob

Effects Layouts (blog)

J. Rockett Boing Reverb

Based on the J. Rockett Boing Reverb· 3 other boards clone it

Category
Reverb
Controls
Reverb
Layout
Unverified · no build reported at Effects Layouts (blog) yet
Tags
Reverb, Rockett

From the post

Got a request for this one and we can always do with more reverb. It's a simple one-knob BTDR-2 based circuit and should fit easily in a 1590B. Reverb brick and pot is populated on the solder side. Schematic for reference.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 19 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • Regulator: labelled 7805 only on the wiring diagram, drawn in a TO-92 outline, so a 78L05 is probably intended
RefValueNormalizedTypeNotes
Resistors 9
×1390Ω390read from the layout by eye
×239K39kread from the layout by eye
×510K10kread from the layout by eye
×122K22kread from the layout by eye
×21M1Mread from the layout by eye
×133K33kread from the layout by eye
×115K15kread from the layout by eye
×1100K100kread from the layout by eye
×14.7K4.7kread from the layout by eye
Capacitors 5
×3100nF100nread from the layout by eye
×115nF15nread from the layout by eye
×14.7uF4.7uelectrolytic; read from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
×2100uF100uelectrolytic; read from the layout by eye
Diodes 1
×11N58171N5817read from the layout by eye
ICs 2
×2TL072TL072read from the layout by eye
×178057805regulator, TO-92 outline; read from the layout by eye
Potentiometers 1
ReverbA10KA10kPotentiometerread from the layout by eye
Other 1
×1BTDR-2BTDR-2reverb module, mounted to solder side; read from the layout by eye

Other boards based on the J. Rockett Boing Reverb