1590BB · 4 knobs
Double LlamaVerified
Based on the Double Llama
From the post
Had a request for 2 Red Llamas on a single board, and my initial reaction was, "Just build two," but since there are 4 unused hex inverters that could easily be used for a second Llama, my reaction changed to, "Why not?" lol Designed to fit in a 1590BB, but might fit vertically and sideways in a 125B.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 15 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| ×4 | 1M | 1M | read from the layout by eye | |
| ×4 | 100K | 100k | read from the layout by eye | |
| ×1 | 1K | 1k | read from the layout by eye | |
| Capacitors 6 | ||||
| ×2 | 68nF | 68n | read from the layout by eye | |
| ×2 | 33nF | 33n | read from the layout by eye | |
| ×2 | 100pF | 100p | read from the layout by eye | |
| ×2 | 51pF | 51p | read from the layout by eye | |
| ×2 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×1 | 330uF | 330u | electrolytic, axial; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| ICs 1 | ||||
| ×1 | CD4049UBE | CD4049UBE | read from the layout by eye | |
| Potentiometers 4 | ||||
| Gain A | B1M | B1M | Potentiometer | read from the layout by eye |
| Gain B | B1M | B1M | Potentiometer | read from the layout by eye |
| Volume A | A10K | A10k | Potentiometer | read from the layout by eye |
| Volume B | A10K | A10k | Potentiometer | read from the layout by eye |