Akashic Guitar effects circuit lookup
TREBLEBASSVOLUME

Enclosure not stated · 3 knobs

Effects Layouts (blog)

Music Man Sabre II Bass Preamp

Based on the Music Man Sabre II Bass Preamp

Controls
Treble · Bass · Volume
Layout
Unverified · no build reported at Effects Layouts (blog) yet
Tags
Bass, Music Man, Preamp

From the post

Lot of requests for this one after I posted the Stingray pre a few weeks ago, so here's the Sabre II. Pretty similar the the Stingray but with a few value differences and extra resistor in the feedback loop, and the added bright switch.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 18 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 6
×14.7K4.7kread from the layout by eye
×210K10kread from the layout by eye
×1100K100kread from the layout by eye
×1220K220kread from the layout by eye
×11.5M1.5Mread from the layout by eye
×22.2M2.2Mread from the layout by eye
Capacitors 7
×1100pF100pread from the layout by eye
×11nF1nread from the layout by eye
×11.8nF1.8nread from the layout by eye
×12.2nF2.2nread from the layout by eye
×147nF47nread from the layout by eye
×41uF1uelectrolytic; read from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
ICs 1
IC1LM4250LM4250read from the layout by eye
Potentiometers 3
TrebleC1MC1MPotentiometerread from the layout by eye
BassA100KA100kPotentiometerread from the layout by eye
VolumeA25KA25kPotentiometerread from the layout by eye
Switches 1
BrightSPSTSPSTon/off; read from the layout by eye