Enclosure not stated · 2 knobs
Bass Filter PedalVerified
Based on the Bass Filter Pedal
- Category
- EQ / Filter
- Build
- Perfboard
- Layout
- Verified · Effects Layouts (blog) marks it as built and working
- Tags
- Bass, Filter
From the post
Here's a cool little bass filter pedal designed by bleepboxes. Really low parts count should make for a pretty quick build. Original info here. Might be a good idea to put the 4.7n cap on a switch with a 2.2n for more tonal variation.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this layout was not sure of
- Regulator: type 78L06 is printed only on the wiring diagram, the perfboard shows just the pins O G I
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 1 | ||||
| ×1 | 1M | 1M | read from the layout by eye | |
| Capacitors 4 | ||||
| ×2 | 100nF | 100n | read from the layout by eye | |
| ×1 | 4.7nF | 4.7n | read from the layout by eye | |
| ×1 | 1uF | 1u | electrolytic; read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| ×1 | 1N4148 | 1N4148 | printed 4148; read from the layout by eye | |
| ×1 | 1N4001 | 1N4001 | printed 4001; read from the layout by eye | |
| ICs 2 | ||||
| ×1 | LM567 | LM567 | printed 567, tone decoder; read from the layout by eye | |
| ×1 | 78L06 | 78L06 | regulator, named on the wiring diagram; read from the layout by eye | |
| Potentiometers 2 | ||||
| Filter | B10K | B10k | Potentiometer | read from the layout by eye |
| Volume | A100K | A100k | Potentiometer | read from the layout by eye |