Akashic Guitar effects circuit lookup
BALLSGAIN

Enclosure not stated · 2 knobs

Effects Layouts (blog)

TAD Range KingVerified

Based on the TAD Range King

Category
Boost
Controls
Balls · Gain
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Booster, Tube Amp Doctor

From the post

Nice little booster from Tube Amp Doctor. There's still a little bit of confusion on FSB over the correct value of the resistors biasing the base of the transistor, but this should work. Schematic and discussion here. If you'd like a fabricated version of this layout, check out the Strider PCB in the store.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 16 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 7
×14.7K4.7kread from the layout by eye
×1470K470kread from the layout by eye
×11K1kread from the layout by eye
×11M1Mread from the layout by eye
×122K22kread from the layout by eye
×12.2M2.2Mread from the layout by eye
×1270Ω270read from the layout by eye
Capacitors 5
×1100nF100nread from the layout by eye
×133nF33nread from the layout by eye
×122nF22nread from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
×1470uF470uelectrolytic; read from the layout by eye
Diodes 1
×11N40011N4001read from the layout by eye
Transistors 1
Q1BC550CBC550Cread from the layout by eye
Potentiometers 2
BallsA50KA50kPotentiometerread from the layout by eye
GainA100KA100kPotentiometerread from the layout by eye