1590BB · 6 knobs
Wampler Hot Wired V1Verified
Based on the Wampler Hot Wired V1· 1 other board clones it
- Category
- Distortion
- Controls
- Volume B · Tone B · Drive B · Drive A · Tone A · Volume A
- Build
- Perfboard
- Layout
- Verified · Effects Layouts (blog) marks it as built and working
- Tags
- Distortion, Overdrive, Wampler
From the post
The Hot Wired is a dual channel dirt box offering distortion and overdrive modeled after the tones used by Nashville session artist Brent Mason. I've laid it out for board mounted pots with the board mounted vertically in the enclosure. I laid it out with a 1590BB in mind, but you might be able to make it work in a 125B as well.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 27 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 2 values the reader of this layout was not sure of
- Two small glass diodes right of the IC: the board labels them only D3 and D6, the wiring diagram prints 4148 on both; entered as 1N4148
- 1uF by Tone B/Drive B and 1uF by Tone A are drawn as grey rounded boxes, not round cans: taken as non-polarised (film/box) caps, the round 1uF bottom left as electrolytic
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×4 | 10K | 10k | read from the layout by eye | |
| ×4 | 1K | 1k | read from the layout by eye | |
| ×4 | 1M | 1M | read from the layout by eye | |
| ×1 | 820K | 820k | read from the layout by eye | |
| ×1 | 470Ω | 470 | read from the layout by eye | |
| Capacitors 10 | ||||
| ×5 | 220nF | 220n | read from the layout by eye | |
| ×2 | 470nF | 470n | read from the layout by eye | |
| ×1 | 22nF | 22n | read from the layout by eye | |
| ×1 | 33nF | 33n | read from the layout by eye | |
| ×3 | 100pF | 100p | read from the layout by eye | |
| ×1 | 47pF | 47p | read from the layout by eye | |
| ×2 | 1uF | 1u | box; read from the layout by eye | |
| ×1 | 1uF | 1u | electrolytic; read from the layout by eye | |
| ×1 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| ×2 | 1N4148 | 1N4148 | labelled D3 and D6 on the board, 4148 on the wiring diagram; read from the layout by eye | |
| ICs 1 | ||||
| IC1 | RC4580 | RC4580 | wiring diagram prints 4580DD; read from the layout by eye | |
| Potentiometers 6 | ||||
| Volume B | A100K | A100k | Potentiometer | read from the layout by eye |
| Tone B | C25K | C25k | Potentiometer | read from the layout by eye |
| Drive B | A500K | A500k | Potentiometer | read from the layout by eye |
| Drive A | A500K | A500k | Potentiometer | read from the layout by eye |
| Tone A | C10K | C10k | Potentiometer | read from the layout by eye |
| Volume A | A100K | A100k | Potentiometer | read from the layout by eye |
| Switches 2 | ||||
| Fat A | SPDT on/off/on | SPDT ON/OFF/ON | toggle; read from the layout by eye | |
| Fat B | SPST | SPST | read from the layout by eye | |
| LEDs 1 | ||||
| ×4 | Red LED | RED LED | D1-4: 3mm or 5mm red LEDs; read from the layout by eye | |
Other boards based on the Wampler Hot Wired V1
- Wampler Hot Wired v.1 Tagboard Effects