1590B · 3 knobs
GodCity Brutalist JrVerified
Based on the GodCity Brutalist Jr
- Category
- Distortion
- Controls
- Distortion · Loudness · Volume
- Build
- Perfboard
- Layout
- Verified · Effects Layouts (blog) marks it as built and working
- Tags
- Distortion
From the post
Here's a really cool distortion based on Providence Stampede and designed by Kurt Ballou of GodCity Studio. He's actually made his business card a PCB you can build this circuit on, and if you can catch them while they're in stock you totally should. But while they're sold out, you can build one using this layout. Fits in a 1590B or a 125B with top mounted jacks if you prefer.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 29 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 2 values the reader of this layout was not sure of
- Power diode right of the lower 4.7K: the populated board prints 5818, the wiring diagram prints 5817; entered as on the board
- 300pF between the 100K and 22K above the 120K: printed clearly on board and diagram, unusual value
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| ×3 | 10K | 10k | read from the layout by eye | |
| ×3 | 2.2K | 2.2k | read from the layout by eye | |
| ×2 | 100K | 100k | read from the layout by eye | |
| ×1 | 22K | 22k | read from the layout by eye | |
| ×1 | 120K | 120k | read from the layout by eye | |
| ×2 | 2.2M | 2.2M | read from the layout by eye | |
| ×2 | 4.7K | 4.7k | read from the layout by eye | |
| ×2 | 1K | 1k | read from the layout by eye | |
| ×1 | 120Ω | 120 | read from the layout by eye | |
| ×1 | 18K | 18k | read from the layout by eye | |
| ×1 | 12K | 12k | read from the layout by eye | |
| Capacitors 12 | ||||
| ×2 | 270pF | 270p | read from the layout by eye | |
| ×1 | 300pF | 300p | read from the layout by eye | |
| ×2 | 330pF | 330p | read from the layout by eye | |
| ×1 | 2.2nF | 2.2n | read from the layout by eye | |
| ×1 | 22nF | 22n | read from the layout by eye | |
| ×1 | 27nF | 27n | read from the layout by eye | |
| ×1 | 100nF | 100n | read from the layout by eye | |
| ×1 | 220nF | 220n | read from the layout by eye | |
| ×2 | 1uF | 1u | box film; read from the layout by eye | |
| ×1 | 3.3uF | 3.3u | electrolytic; read from the layout by eye | |
| ×1 | 22uF | 22u | electrolytic; read from the layout by eye | |
| ×2 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| ×2 | 1N4148 | 1N4148 | printed 4148; read from the layout by eye | |
| ×1 | 1N5818 | 1N5818 | printed 5818 on the board, 5817 on the wiring diagram; read from the layout by eye | |
| ICs 1 | ||||
| ×2 | TL072 | TL072 | read from the layout by eye | |
| Potentiometers 3 | ||||
| Distortion | A50K | A50k | Potentiometer | board label Distort; read from the layout by eye |
| Loudness | B1M | B1M | Potentiometer | read from the layout by eye |
| Volume | A100K | A100k | Potentiometer | read from the layout by eye |