125B
DeadAstronaut Chasm ReverbVerified
Based on the Dead Astronaut Chasm Reverb· 2 other boards clone it· the maker's own board is Chasm Reverb by Dead Astronaut FX
From the post
Been a while since I did a reverb layout and this DeadAstronaut design does not disappoint. It's not a true-bypass effect, but uses some JFET switching so that tails are present when you turn the effect off. Coda Effects actually has a really good write up on the design. Ended up doing this one in Eagle and was able to squeeze it into a 125B. If you want a fabricated board, you can order some off OshPark.
Here's the build doc with the BOM, schematic, and drill template.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 0 rows
Report a wrong parseNo parts could be read from this layout; the values are printed on the parts in the drawing.
Other boards based on the Dead Astronaut Chasm Reverb
- Chasm Reverb the original · Dead Astronaut FX · £15.00
- Dead Astronaut Chasm Reverb Dirtbox Layouts
- Chasm Reverb (CODA effects) PCBWay: Glory to Ukraine