1590A
Tiger Pre-AmpVerified
Based on the Jerry Garcia Tiger Preamp· 2 other boards clone it
From the post
If you're a Dead Head, you'll probably be interested in this one. It's the pre-amp from Jerry Garcia's Tiger guitar used from '79-'89 and built by Doug Irwin. It's a unity gain buffer to prevent signal loss with long cables. It can be built into a guitar like the original or into a 1590A. Other single op-amps can be used instead of the LF356N (TL071, NE5534, etc).
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 9 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×2 | 1M | 1M | read from the layout by eye | |
| ×1 | 100K | 100k | read from the layout by eye | |
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 100Ω | 100 | read from the layout by eye | |
| Capacitors 3 | ||||
| ×2 | 22nF | 22n | read from the layout by eye | |
| ×1 | 2.2uF | 2.2u | electrolytic; read from the layout by eye | |
| ×1 | 47uF | 47u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| ICs 1 | ||||
| ×1 | LF356N | LF356N | read from the layout by eye | |
Other boards based on the Jerry Garcia Tiger Preamp
- Tigger Buffer Fuzz Dog · 1590A · £19.20
- Jerry Garcia Tiger Preamp Tagboard Effects