Enclosure not stated · 2 knobs
OMG FuzzVerified
Based on the OMG Fuzz
From the post
Found this design over on DIYSB and thought it would be a good Fuzz Friday layout. The One Mighty Gnarly Fuzz is a pretty straight forward design that you probably have all the parts for in your parts drawer. Check out the DIYSB thread for the schematic, and build notes.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 16 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 8 | ||||
| ×1 | 4.7K | 4.7k | to LED+; read from the layout by eye | |
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 22K | 22k | read from the layout by eye | |
| ×1 | 56K | 56k | read from the layout by eye | |
| ×1 | 68K | 68k | read from the layout by eye | |
| ×1 | 100K | 100k | read from the layout by eye | |
| ×3 | 1M | 1M | read from the layout by eye | |
| ×1 | 2.2M | 2.2M | read from the layout by eye | |
| Capacitors 3 | ||||
| ×1 | 10nF | 10n | read from the layout by eye | |
| ×5 | 100nF | 100n | read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4004 | 1N4004 | read from the layout by eye | |
| Transistors 1 | ||||
| ×3 | 2N5088 | 2N5088 | Q1-3; read from the layout by eye | |
| Potentiometers 2 | ||||
| Gain | B100K | B100k | Potentiometer | board mounted; read from the layout by eye |
| Level | B100K | B100k | Potentiometer | board mounted; read from the layout by eye |
| LEDs 1 | ||||
| D1 | ? | ? | value not given; drawn as a round LED on the board; read from the layout by eye | |