Akashic Guitar effects circuit lookup
VOL

1590A · 1 knob

Effects Layouts (blog)

Heavy Darling FuzzVerified

Based on the Heavy Electronics Darling Fuzz

Category
Fuzz
Controls
Vol
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Dragonfly, Fuzz

From the post

Found this one over on DIYSB and thought it'd be a good Fuzz Friday layout. It was designed by Dragonfly for the old FX-X contests. Here's what he had to say about it:

The Heavy Darling is a SIMPLE fuzztone that cleans up great, has old school character, and good sustain...pretty much ANYONE who can solder should be able to build this one. It uses a MPSA13 Darlington transistor in the 1st stage that pushes the 2N3904 into full saturation. The 220k resistor limits the amount of saturation, and you could certainly experiment with values here. A pot could also be used to give some variable gain, and you could even set up the pot in a similar manner to the Orpheum, Fuzzrite, and Shin-Ei style fuzzes.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 14 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 7
×11K1kread from the layout by eye
×11.5K1.5kread from the layout by eye
×14.7K4.7kto LED+; read from the layout by eye
×110K10kread from the layout by eye
×1220K220kread from the layout by eye
×1470K470kread from the layout by eye
×21M1Mread from the layout by eye
Capacitors 3
×347nF47nread from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
Diodes 1
×11N58171N5817read from the layout by eye
Transistors 2
Q1MPSA13MPSA13read from the layout by eye
Q22N39042N3904read from the layout by eye
Potentiometers 1
VolA100KA100kPotentiometerread from the layout by eye